黑龙江11选5

E-mail: service@rorfm.com
Mobile: +86-15328181468 Tel: +86-28-8339-7306

Sign Up for Newest Article


Get Newest article and product from SINOCMP

Contact Us

CMP Technology Co., Limited
Tel: +86-28-8339-7306
Fax: +86-755-22634631
Mobile: +86-15328181468
E-mail: service@rorfm.com
Whatsapp: +8615328181468
Skype: Mou Mark(CMP)
Add: RM.301 3F Building A, No. 46, Pu Pai Road, Xinlian Community, Longcheng Street, Longgang District, Shenzhen China 518172

5 Common Faults And Solutions You Must Know About The Rotation of The Excavator

黑龙江11选5Author:Lanye Wang Date:2020-8-6

1 The excavator cannot rotate

  • First check whether the rotating switch of the safety box behind the cab is turned on. If it is turned on, it means that the rotary parking brake is turned on, and the rotary parking brake needs to be released. As long as the button switch is placed in the RELEASE LOCK position, it can be forced Release the rotating parking brake.

  • Check whether the pilot pressure during rotation is normal.

  • Whether the rotating spool is issued a card, causing the switch not to be in place.


2 Rotating brakes will not stop the car

  • Check whether the rotating relief valve on the rotating motor is stuck, and you need to disassemble the valve core to see.

excavator rotation.jpg

  • Check whether the rotary brake solenoid valve is malfunctioning, whether the spool is stuck, and clean it directly. If it is broken, it needs to be replaced.

  • If the above is normal, check whether there is a problem inside the motor.


3 Rotation is weak, slow, fast and slow

  • Check whether the overflow pressure during rotation is normal.

  • If abnormal, check whether the left/right rotating relief valve is malfunctioning.

  • Check whether the pilot pressure is normal.


4 Rotating abnormal noise

Need to determine whether the abnormal noise comes from the rotating motor or the large ring gear.

  • If abnormal noise occurs when turning to a fixed position, consider the wear of the large and small gear rings。


Remark: Pay attention to the maintenance of the big gear ring at ordinary times. Grease the grease nipple of the big gear ring once every 1000 hours. Each time you hit it, rotate it by 90 degrees and press it twice for a total of 8 presses.


  • If the rotating motor makes abnormal noise, it needs to be disassembled to see where the wear appears。 The parts that may be worn are: plunger, valve plate, pump liner, 9-hole plate。


5 Spin and hold the car alone

When rotating alone or in conjunction with other actions, the excavator must enter the service diagnosis to check whether the overflow pressure of each action is normal.

sinocmp repair technology.jpg


Previous : [Excavator Computer Board Working principle and Repair]
Next : [The engine water temperature is too high? SINOCMP is there for you!]
Related Posts :
Comment :

*

*

*

*

(All * must be filled in)



浙江体彩6+1 安徽11选5走势图 内蒙古快3计划 众盈彩票APP 安徽11选5走势图 安徽11选5走势图 9号棋牌APP 黑龙江11选5 千禧彩票手机app下载 浙江体彩6+1走势图